Embedded Files
May 1, 2020
May 1, 2020
Our last senior design Zoom meeting. This is a photo of our awesome senior design team. The project is into two parts: firmware design (Grant Udstrand and Jacob Cantrell) and analog design (Owen Roe, Li-Sha Lim, and Joe Bajda). All the students attend the weekly MagiCoil meeting with other team members from Dr. Wang’s group, to learn overall progress from the mechanical design and software built up, and get feedback from the requirements on the circuits part.
Congratulations! We wish you success in all your future endeavors!
From top left to bottom right: Prof. Jian-Ping Wang, Dr. Kai Wu, Owen Roe, Joe bajda, Vinit K Chugh, Grant Udstrand, Jacob F Cantrell, Li-Sha Lim.
(Li-Sha Lim was in an on-site interview, her photo was added later.)
Mar 20, 2020
Mar 20, 2020
MagiCoil team welcomes new members from Computer Science Department: Ying Lu and Zihe Li. They will assist in the MagCoil device user app and desktop software development.
Mar 9, 2020
Mar 9, 2020
In our recenlty published paper, we reported the MPS-based detection of Influenza A Virus subtype H1N1. Using MPS and the self-assembly of MNPs, we were able to detect as low as 44 nM (4.4 pmole) H1N1 nucleoprotein. This advancement opens a door to the virus dianostics using our MPS technology.
Jan 31, 2020
Jan 31, 2020
MagiCoil team welcomes 2020 Spring Senior Design team: Jacob Cantrell, Joe Bajda, Grant Udstrand, Li-Sha Lim, Owen Roe. Their Electrical Engineering background will contribute to improve the current circuit board design.
Jan 29, 2020
Jan 29, 2020
MagiCoil team welcomes new members from Mechanical Engineering Department: Natas Seekaew and Long Nguyen. They will assist in the manufacture of device shell and coil molds.
June 22, 2019
June 22, 2019
MagiCoil weekly meeting discussion.
From left to right: Charlie Vuong, Abilash Nair, and Jeremy Wood.
May 16, 2019
May 16, 2019
MagiCoil team happy hour & faiware to the senior design team members.
From left to right: Abilash Nair, Renata Saha, Wes Oldenburg, Dr. Kai Wu, and Prof. Jian-Ping Wang.
May 2, 2019
May 2, 2019
Congratulations to the senior design team on accomplishing their product launch presentation!
From left to right: Leonard Yu, Jackie Zamow, Abilash Nair, Prof. Jian-Ping Wang, Wes Oldenburg, and Nuraqilah Hanis Abd Ghani.
Apr 30, 2019
Apr 30, 2019
The circuit board design (EE) team presenting our exciting work in the Senior Design Showcase.
From left to right: Leonard Yu, Wes Oldenburg, Abilash Nair, Nuraqilah Hanis Abd Ghani, and Jackie Zamow.
Apr 22, 2019
Apr 22, 2019
First MagiCoil v1.0 shell model is released! Designed by Adam Wall.
Apr 18, 2019
Apr 18, 2019
First MagiCoil v1.0 circuit board is assembled and electronic components are soldered successfully!
Apr 15, 2019
Apr 15, 2019
Our first set of coil molds are 3D printed!
Apr 11, 2019
Apr 11, 2019
The MagiCoil team welcomes new team members: James Schealler, Ryan Billmeyer, Arturo Di Girolamo, and Jeremy Wood. They will take over the circuit board design and further optimize the system.
Mar 4, 2019
Mar 4, 2019
The MagiCoil team welcomes new team members: Will Davies, Sanjit Nagesh, and Eric Heidal. Their computer science background will help us in developing user interface to work seamlessly with the hardware part.
Feb 4, 2019
Feb 4, 2019
Hello World!
The Electrical Engineering senior design team: Abilash Nair, Leonard Yu, Jackie Zamow, Nuraqilah Hanis Abd Ghani, and Wes Oldenburg are joining the MagiCoil team to make the MagiCoil v.1.0 handheld device possible. They will apply their skills in circuit board design in developing a point-of-care device.
The Mechanical Engineering students: Nurul Farina binti Mazlan and Adam Wall will take care of the device structure design using their skills in 3D modeling and 3D printing.
Report abuse